dmesg - budi harjani
microcode: microcode updated early to revision 0x28, date = 2019-11-12
Linux version 5.11.0-122-tkg-bmq (linux511-tkg-bmq@archlinux) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36) #1 TKG SMP PREEMPT Tue, 16 Feb 2021 02:37:42 +0000
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000004efff] usable
BIOS-e820: [mem 0x000000000004f000-0x000000000004ffff] reserved
BIOS-e820: [mem 0x0000000000050000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd01cfff] usable
BIOS-e820: [mem 0x00000000bd01d000-0x00000000bd023fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd024000-0x00000000bd463fff] usable
BIOS-e820: [mem 0x00000000bd464000-0x00000000bd7dffff] reserved
BIOS-e820: [mem 0x00000000bd7e0000-0x00000000cfbe4fff] usable
BIOS-e820: [mem 0x00000000cfbe5000-0x00000000cfdddfff] reserved
BIOS-e820: [mem 0x00000000cfdde000-0x00000000cfdfbfff] ACPI data
BIOS-e820: [mem 0x00000000cfdfc000-0x00000000cfed0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfed1000-0x00000000dbf85fff] reserved
BIOS-e820: [mem 0x00000000dbf86000-0x00000000dbffefff] type 20
BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xcfde4000 ACPI 2.0=0xcfde4000 SMBIOS=0xdbf84498
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP ProDesk 400 G1 MT/198E, BIOS L02 v02.56 04/24/2019
tsc: Fast TSC calibration using PIT
tsc: Detected 3192.507 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DE000000 mask 7FFE000000 uncachable
4 base 00DD000000 mask 7FFF000000 uncachable
5 base 021FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 8142M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 8 lose cover RAM: 0G
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
last_pfn = 0xdc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4e70-0x000f4e7f]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
Secure boot could not be determined
RAMDISK: [mem 0x36da3000-0x376c8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CFDE4000 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000CFDE4088 000094 (v01 HPQOEM SLIC-BPC 20190424 AMI 00010013)
ACPI: FACP 0x00000000CFDF1330 00010C (v05 HPQOEM SLIC-BPC 20190424 AMI 00010013)
ACPI: DSDT 0x00000000CFDE41B0 00D17D (v02 HPQOEM SLIC-BPC 00000001 INTL 20091112)
ACPI: FACS 0x00000000CFECF080 000040
ACPI: APIC 0x00000000CFDF1440 000072 (v03 HPQOEM SLIC-BPC 20190424 AMI 00010013)
ACPI: FPDT 0x00000000CFDF14B8 000044 (v01 HPQOEM SLIC-BPC 20190424 AMI 00010013)
ACPI: SSDT 0x00000000CFDF1500 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000CFDF1A40 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x00000000CFDF2518 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711)
ACPI: MCFG 0x00000000CFDF26E0 00003C (v01 HPQOEM SLIC-BPC 20190424 MSFT 00000097)
ACPI: HPET 0x00000000CFDF2720 000038 (v01 HPQOEM SLIC-BPC 20190424 AMI. 00000005)
ACPI: SSDT 0x00000000CFDF2758 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CFDF2AC8 002881 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: SSDT 0x00000000CFDF5350 00668F (v01 COMPAQ WMI 00000001 MSFT 03000001)
ACPI: SLIC 0x00000000CFDFB9E0 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: MSDM 0x00000000CFDFBB58 000055 (v03 HPQOEM SLIC-BPC 20190424 HPQ 00010013)
ACPI: DMAR 0x00000000CFDFBBB0 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
NODE_DATA(0) allocated [mem 0x21fdfc000-0x21fdfffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000004efff]
node 0: [mem 0x0000000000050000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bd01cfff]
node 0: [mem 0x00000000bd024000-0x00000000bd463fff]
node 0: [mem 0x00000000bd7e0000-0x00000000cfbe4fff]
node 0: [mem 0x00000000dbfff000-0x00000000dbffffff]
node 0: [mem 0x0000000100000000-0x000000021fdfffff]
Zeroed struct page in unavailable ranges: 35329 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
On node 0 totalpages: 2029055
DMA zone: 64 pages used for memmap
DMA zone: 40 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13218 pages used for memmap
DMA32 zone: 845923 pages, LIFO batch:63
Normal zone: 18424 pages used for memmap
Normal zone: 1179136 pages, LIFO batch:63
Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0004f000-0x0004ffff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xbd01d000-0xbd023fff]
PM: hibernation: Registered nosave memory: [mem 0xbd464000-0xbd7dffff]
PM: hibernation: Registered nosave memory: [mem 0xcfbe5000-0xcfdddfff]
PM: hibernation: Registered nosave memory: [mem 0xcfdde000-0xcfdfbfff]
PM: hibernation: Registered nosave memory: [mem 0xcfdfc000-0xcfed0fff]
PM: hibernation: Registered nosave memory: [mem 0xcfed1000-0xdbf85fff]
PM: hibernation: Registered nosave memory: [mem 0xdbf86000-0xdbffefff]
PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2548493796700712 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288
pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 1997309
Policy zone: Normal
audit: disabled (until reboot)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
Memory: 7797912K/8116220K available (14343K kernel code, 1990K rwdata, 8828K rodata, 1684K init, 4396K bss, 318048K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x26/0x4f0 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 41676 entries in 163 pages
ftrace: allocated 163 pages with 4 groups
sched/bmq: BMQ CPU Scheduler v5.11-r0 by Alfred Chen.
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU dyntick-idle grace-period acceleration is enabled.
rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
rcu: RCU priority boosting: priority 1 delay 500 ms.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 75 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
rcu: Offload RCU callbacks from CPUs: (none).
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20201113
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000cfd73000 end: 0x000000cfd7ffff
DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e04a3d2040, max_idle_ns: 440795261560 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6391.46 BogoMIPS (lpj=4256676)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
SRBDS: Mitigation: Microcode
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 32K
smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1088
smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (25565.84 BogoMIPS)
sched: cpu#00 affinity: 0x0000000e topo: 0x0000000f - coregroup
sched: cpu#00 llc_id = 0, llc_mask idx = 1
sched: cpu#01 affinity: 0x0000000d topo: 0x0000000f - coregroup
sched: cpu#01 llc_id = 0, llc_mask idx = 1
sched: cpu#02 affinity: 0x0000000b topo: 0x0000000f - coregroup
sched: cpu#02 llc_id = 0, llc_mask idx = 1
sched: cpu#03 affinity: 0x00000007 topo: 0x0000000f - coregroup
sched: cpu#03 llc_id = 0, llc_mask idx = 1
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbd01d000-0xbd023fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xcfdfc000-0xcfed0fff] (872448 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 2548346626961994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 05:32:26, date: 2021-02-16
NET: Registered protocol family 16
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89FDC0F39400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89FDC0AF7000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF89FDC0F8F400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7d0a000-0xf7d0a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7d08000-0xf7d083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7d00000-0xf7d03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7d07000-0xf7d073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7d06000-0xf7d067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d05000-0xf7d050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0004f000-0x0004ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd01d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd464000-0xbfffffff]
e820: reserve RAM buffer [mem 0xcfbe5000-0xcfffffff]
e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: can't evaluate _CRS: 12311
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a20-0x0a3f] has been reserved
system 00:04: [io 0x0a10-0x0a1f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x780 took 17339 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x780 took 16908 usecs
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 9368K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000c70d3000-0x00000000cb0d3000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.5.1 model 0x3C
intel_idle: Local APIC timer is reliable in all C-states
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06180 irq 28
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf7d06000 port 0xf7d06300 irq 28
usbcore: registered new interface driver usbserial_generic
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2021-02-16T05:32:26 UTC (1613453546)
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
pstore: Registered efi as persistent store backend
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
NET: Registered protocol family 17
microcode: sig=0x306c3, pf=0x2, revision=0x28
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (646192120, 233351)->(648162158, -1736687)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: e3fc2aac69473a48719e3a4982bd01e748d8af1f'
zswap: loaded using pool lz4/z3fold
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: zstd
PM: Magic number: 9:183:517
acpi LNXPOWER:01: hash matches
RAS: Correctable Errors collector initialized.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: ST500DM002-1BD142, HP73, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata5.00: ATA-8: Hitachi HTS545016B9A300, PBBOCA0G, max UDMA/100
ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 HP73 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 1:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA Hitachi HTS54501 CA0G PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 1684K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1412K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/@/boot/vmlinuz-linux511-tkg-bmq
fbcon: Taking over console
Console: switching to colour frame buffer device 170x48
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d08000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.11.0-122-tkg-bmq ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d07000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.11.0-122-tkg-bmq ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
tsc: Refined TSC clocksource calibration: 3192.607 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0501eb3d1, max_idle_ns: 440795254769 ns
clocksource: Switched to clocksource tsc
random: fast init done
random: crng init done
raid6: avx2x4 gen() 32828 MB/s
raid6: avx2x4 xor() 11773 MB/s
raid6: avx2x2 gen() 31152 MB/s
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: new high-speed USB device number 2 using ehci-pci
raid6: avx2x2 xor() 19245 MB/s
raid6: avx2x1 gen() 29415 MB/s
raid6: avx2x1 xor() 16711 MB/s
raid6: sse2x4 gen() 17114 MB/s
raid6: sse2x4 xor() 9291 MB/s
raid6: sse2x2 gen() 18199 MB/s
usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
raid6: sse2x2 xor() 11295 MB/s
raid6: sse2x1 gen() 14082 MB/s
raid6: sse2x1 xor() 9284 MB/s
raid6: using algorithm avx2x4 gen() 32828 MB/s
raid6: .... xor() 11773 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Btrfs loaded, crc32c=crc32c-intel, zoned=yes
BTRFS: device fsid 9abb06ab-3630-4d5f-a4e6-5a0943080501 devid 1 transid 2781 /dev/sdb3 scanned by systemd-udevd (165)
BTRFS: device fsid a6292292-3dfd-4ff0-95b4-808a6f3a96ed devid 1 transid 6429 /dev/sdc2 scanned by systemd-udevd (180)
BTRFS info (device sdb3): disk space caching is enabled
BTRFS info (device sdb3): has skinny extents
usb 2-1.3: new low-speed USB device number 3 using ehci-pci
usb 2-1.3: New USB device found, idVendor=03f0, idProduct=134a, bcdDevice= 1.00
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: HP USB Optical Mouse
usb 2-1.3: Manufacturer: PixArt
usb 2-1.4: new low-speed USB device number 4 using ehci-pci
usb 2-1.4: New USB device found, idVendor=0461, idProduct=0010, bcdDevice= 1.04
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB Keyboard
usb 2-1.4: Manufacturer: NOVATEK
systemd[1]: systemd 247.3-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target System Time Set.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 262 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
Linux agpgart interface v0.103
systemd[1]: Finished Coldplug All udev Devices.
fuse: init (API version 7.33)
systemd[1]: modprobe@fuse.service: Succeeded.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Mounted FUSE Control File System.
mc: Linux media interface: v0.10
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Finished Set Up Additional Binary Formats.
videodev: Linux video capture interface: v2.00
BTRFS info (device sdb3): use zstd compression, level 3
BTRFS info (device sdb3): enabling auto defrag
BTRFS info (device sdb3): disk space caching is enabled
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
v4l2loopback_dc: loading out-of-tree module taints kernel.
v4l2loopback_dc: module verification failed: signature and/or required key missing - tainting kernel
v4l2loopback driver version 0.6.3 (droidcam) loaded
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Condition check resulted in First Boot Complete being skipped.
i2c /dev entries driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Rule-based Manager for Device Events and Files...
systemd[1]: Started Journal Service.
systemd-journald[277]: Received client request to flush runtime journal.
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20201113/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20201113/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20201113/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20201113/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20201113/utaddress-204)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20201113/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-0: 2/2 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
hid: raw HID events driver (C) Jiri Kosina
libphy: Fixed MDIO Bus: probed
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
i915 0000:00:02.0: [drm] PipeC fused off
checking generic (e0000000 410000) vs hw (f7800000 400000)
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb0: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: vgaarb: deactivate vga console
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
fbcon: i915drmfb (fb0) is primary device
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
libphy: r8169: probed
r8169 0000:02:00.0 eth0: RTL8168g/8111g, 9c:b6:54:ec:39:93, XID 4c0, IRQ 31
r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
r8169 0000:02:00.0 enp2s0: renamed from eth0
input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:03F0:134A.0001/input/input5
hid-generic 0003:03F0:134A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:0461:0010.0002/input/input6
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
cryptd: max_cpu_qlen set to 1000
hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.4/input0
input: NOVATEK USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:0461:0010.0003/input/input7
input: HP WMI hotkeys as /devices/virtual/input/input9
Adding 4609000k swap on /dev/sdc1. Priority:-2 extents:1 across:4609000k FS
iTCO_vendor_support: vendor-support=0
input: NOVATEK USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:0461:0010.0003/input/input8
hid-generic 0003:0461:0010.0003: input,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.4/input1
snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
at24 0-0050: supply vcc not found, using dummy regulator
at24 0-0050: 256 byte spd EEPROM, read-only
iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
mousedev: PS/2 mouse device common for all mice
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel-spi intel-spi: mx25l6405d (8192 Kbytes)
Creating 1 MTD partitions on "intel-spi":
0x000000000000-0x000000800000 : "BIOS"
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0: Line=0x1b
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
Adding 4194300k swap on /swap/swapfile. Priority:-3 extents:3 across:7463516k FS
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain uncore
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: RAPL package-0 domain package locked by BIOS
intel_rapl_common: RAPL package-0 domain dram locked by BIOS
BTRFS info (device sdc2): use zstd compression, level 3
BTRFS info (device sdc2): enabling auto defrag
BTRFS info (device sdc2): disk space caching is enabled
BTRFS info (device sdc2): has skinny extents
Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
r8169 0000:02:00.0 enp2s0: Link is Down
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready